Kurs/Prototyping med FPGA: Difference between revisions
< Kurs
(Stedet er R9) |
No edit summary |
||
| Line 5: | Line 5: | ||
The course will take a stab at explaining the common basics of commercial FPGAs. We will then demonstrate the basics of hardware design languages (HDL) and present an example of prototyping a design in FPGA where we go slightly in-depth about the tools used and the results they produce. We will also touch briefly on the subject of achieving timing closure in high-speed designs. | The course will take a stab at explaining the common basics of commercial FPGAs. We will then demonstrate the basics of hardware design languages (HDL) and present an example of prototyping a design in FPGA where we go slightly in-depth about the tools used and the results they produce. We will also touch briefly on the subject of achieving timing closure in high-speed designs. | ||
The course is aimed at people interested in hardware. | The course is aimed at people interested in hardware. | ||
The prerequisites are: | |||
- Some knowledge on basic electrical engineering; if you can piece together how a ripple-carry adder works, you're within scope. | |||
Latest revision as of 13:10, 29 October 2010
Tid: Torsdag 4. november 2010, kl. 18:15
Sted: R9
Kursholder: Odd Rune S. Lykkebø
The course will take a stab at explaining the common basics of commercial FPGAs. We will then demonstrate the basics of hardware design languages (HDL) and present an example of prototyping a design in FPGA where we go slightly in-depth about the tools used and the results they produce. We will also touch briefly on the subject of achieving timing closure in high-speed designs.
The course is aimed at people interested in hardware.
The prerequisites are:
- Some knowledge on basic electrical engineering; if you can piece together how a ripple-carry adder works, you're within scope.